$2.75 – $27.50
Metric Collared Zinc Plated Eye Nuts manufactured to DIN582 for general lifting purposes. Collared eye nuts are designed for axial loading to achieve the full Working Load Limit. Reduction in WLL when used at a 45 degree angle.
ALWAYS:
• Make sure the eye nut is fully tightened before use
• Check the collar of eye nut is sitting evenly on the contact surface
• Make sure the eye nut is positioned correctly before attempting the lift
• Check the condition of your eye nut and the relevant wear points before use
NEVER:
• Exceed the marked working load limit
• Force the eye nut into position
• Modify or weld the eye nut. This will affected the WLL
• Use a damaged or worn eye nut
Metric Collared Zinc Plated Eye Nuts manufactured to DIN582 for general lifting purposes. Collared eye nuts are designed for axial loading to achieve the full Working Load Limit. Reduction in WLL when used at a 45 degree angle.
ALWAYS:
• Make sure the eye nut is fully tightened before use
• Check the collar of eye nut is sitting evenly on the contact surface
• Make sure the eye nut is positioned correctly before attempting the lift
• Check the condition of your eye nut and the relevant wear points before use
NEVER:
• Exceed the marked working load limit
• Force the eye nut into position
• Modify or weld the eye nut. This will affected the WLL
• Use a damaged or worn eye nut
Weight | 0.00000000 kg |
---|---|
Manufacture Standard | DIN582 |
Thread Size / Working Load Limit - Din Col. | M10 - 0.23T WLL, M12 - 0.34T WLL, M16 - 0.70T WLL, M20 - 1.20T WLL, M22 - 1.50T WLL, M24 - 1.80T WLL, M27 - 2.50T WLL, M30 - 3.60T WLL, M6 - 0.08T WLL, M8 - 0.14T WLL |
Finish | Zinc Plated |
Fitting Type | Metric Collared Eye Nut |