$15.54 – $54.39
SLR Grade 80 eye nuts are manufactured from grade 80 alloy steel which is suitable for a lifting application. These type of alloy steel lifting eyes offer a higher working load limit for equivalent size when compared to the zinc plated DIN582 type.
ALWAYS:
• Make sure the eye nut is fully tightened before use.
• Check the collar of eye nut is sitting evenly on the contact surface.
• Make sure the eye nut is positioned correctly before attempting the lift.
• Check the condition of your eye nut and the relevant wear points before use.
NEVER:
• Exceed the marked working load limit
• Force the eye nut into position
• Modify or weld the eye nut. This will affected the WLL
• Use a damaged or worn eye nut
Inspection by a competent person should take place at least every 12 months and even more frequently when the components are used in severe operating conditions.
SLR Grade 80 eye nuts are manufactured from grade 80 alloy steel which is suitable for a lifting application. These type of alloy steel lifting eyes offer a higher working load limit for equivalent size when compared to the zinc plated DIN582 type.
ALWAYS:
• Make sure the eye nut is fully tightened before use.
• Check the collar of eye nut is sitting evenly on the contact surface.
• Make sure the eye nut is positioned correctly before attempting the lift.
• Check the condition of your eye nut and the relevant wear points before use.
NEVER:
• Exceed the marked working load limit
• Force the eye nut into position
• Modify or weld the eye nut. This will affected the WLL
• Use a damaged or worn eye nut
Inspection by a competent person should take place at least every 12 months and even more frequently when the components are used in severe operating conditions.
Weight | 0.00000000 kg |
---|---|
G80 Eyebolt Sizes | M10 / 1T WLL, M12 / 2T WLL, M16 / 4T WLL, M20 / 6T WLL, M24 / 8T WLL, M8 / 0.8T WLL |